Find correct parts for your car.

Search by registration number

VIN number / Chasis number

OR

Select Car Make Model

Fitting position	Front
Length (mm)	310
Rod/strut	suspension rod
Svhc	no svhc present!

Product number: 818 0057 10

FAG Front Anti Roll Bar Stabiliser Link For Alpina Bmw Opel Vauxhall 7 Adam B

In stock

Shipping method	Delivery time	Stock
Shipping	15-8-2025	3

Price excl. vat.

£ 10,88

Add to cart

Description

FAG Anti-Roll Bar Link (Stabiliser / Drop Link) – Sold Individually

Genuine FAG anti-roll bar link designed to restore precise roll control and reduce body lean. Built to OE specifications, it connects the stabiliser bar to the suspension strut/control arm for sharp, predictable handling.

What’s Included

Sold as a single link (one side only). For both sides of the axle, please order quantity 2.

Please check the product photos for the exact contents supplied with this item. If you’re unsure, contact us with your VIN/registration and we’ll confirm what’s included and the correct part for your vehicle.

Note: New nuts/bolts are supplied only if shown or stated for your specific part number.

Key Features

OE-matched length and joint angles for direct fit
High-strength ball studs with precision bearing surfaces
Sealed, maintenance-free joints and durable dust boots
Corrosion-resistant finish for long service life
Engineered by FAG (Schaeffler), trusted OE supplier

Check Before You Buy

Position/side: front or rear; left/right; some links are side-specific
Length & ends: straight vs. offset; stud thread size/pitch; nut type (nyloc/castle)
Attachment style: cone/taper seat vs. through-bolt; hex/Torx holding feature
Anti-roll bar diameter / suspension package (sports vs. standard where applicable)
Verify by VIN/registration and FAG/OE part numbers for guaranteed fit

When to Replace

Clunks or rattles over bumps; knocking on rough roads
Loose, vague turn-in or excessive body roll
Torn dust boots, rust contamination or play in the joints
MOT/inspection advisory or fail for link wear

Installation Summary

Support the suspension; remove wheel for access
Counter-hold the ball stud (hex/Torx) to prevent boot damage; remove nuts
Fit new link; torque fixings to OE specification (with suspension loaded at ride height)
Inspect the anti-roll bar bushes and opposite link; replace in axle pairs for best results

Good Practice

Use new self-locking nuts where specified
Do not twist the dust boot during tightening
After replacement, road-test and recheck torque

Warranty: FAG suspension components are covered by the manufacturer’s warranty when supplied via authorised distributors. Correct fitment is required for warranty validity.

Manufacturer	Productnumber
bmw	1 091 496 , 1091496
bmw	1 095 695 , 1095695
bmw	1091496
bmw	1095695
bmw	31 35 1 091 496 , 31351091496
bmw	31 35 1 095 695 , 31351095695
bmw	31351091496
bmw	31351095695
opel	13391512
opel	3 50 233 , 350233
opel	350233

Usage numbers
DELPHI TC972
FEBI BILSTEIN 08920
LEMFÖRDER 13132 02
LEMFÖRDER 1313202
LEMFÖRDER 36900 01
LEMFÖRDER 3690001
MEYLE 316 060 4364/HD
MEYLE 3160604364HD
MONROE L11612
MOOG BM-DS-4364
MOOG BMDS4364
QUINTON HAZELL QLS2968S
RUVILLE 915052
SCHAEFFLER GRUPPE 818 0057 10
SCHAEFFLER GRUPPE 818005710
SIDEM 21161
SWAG 20 79 0007
SWAG 20790007
TRW JTS109

Manufacturer	Model	Version	Engine code	Construction type	Construction start	Construction end	Pk	Power kw
alpina
bmw
opel

FAQ

You can enter your Vehicle Registration Number on our homepage or manually select your vehicle details. We will then filter the parts that match your vehicle. Always double-check the Product Properties section to confirm correct fitment.

Yes! We’re constantly expanding our product range and catalog. If you can’t find the part you’re looking for, please contact us. We work with several manufacturers and may be able to source the part for you.

Many product pages include a Fitment Details tab with additional information. If you still have questions, feel free to use our message service — we’re happy to help.

Parts do not come with additional items like fitting kits or gaskets unless it is clearly specified in the Part Details section of the product page.

Brake Discs: Most standard brake discs are priced individually, but for safety reasons, they must be purchased in pairs. When required, we will automatically set the quantity to 2 in your basket.
Brake Pads: These are sold as a set (either front or rear), so one box is enough for two discs.

The Compatibility Table can be found on each product page, usually below the main product description. Look for a tab or heading labeled Compatibility.