Find correct parts for your car.

Search by registration number

VIN number / Chasis number

OR

Select Car Make Model

Material	plastic
Paired article number	818 0211 10
Fitting position	Rear Right
Rod/strut	coupling rod
Svhc	no svhc present!

Product number: 818 0212 10

FAG Rear Right Anti Roll Bar Stabiliser Link For Audi 80 A4 Coupe

Out of stock

Price incl. vat.

£ 14,51

Notify me when back in stock

Description

FAG Anti-Roll Bar Link (Stabiliser / Drop Link) – Sold Individually

Genuine FAG anti-roll bar link designed to restore precise roll control and reduce body lean. Built to OE specifications, it connects the stabiliser bar to the suspension strut/control arm for sharp, predictable handling.

What’s Included

Sold as a single link (one side only). For both sides of the axle, please order quantity 2.

Please check the product photos for the exact contents supplied with this item. If you’re unsure, contact us with your VIN/registration and we’ll confirm what’s included and the correct part for your vehicle.

Note: New nuts/bolts are supplied only if shown or stated for your specific part number.

Key Features

OE-matched length and joint angles for direct fit
High-strength ball studs with precision bearing surfaces
Sealed, maintenance-free joints and durable dust boots
Corrosion-resistant finish for long service life
Engineered by FAG (Schaeffler), trusted OE supplier

Check Before You Buy

Position/side: front or rear; left/right; some links are side-specific
Length & ends: straight vs. offset; stud thread size/pitch; nut type (nyloc/castle)
Attachment style: cone/taper seat vs. through-bolt; hex/Torx holding feature
Anti-roll bar diameter / suspension package (sports vs. standard where applicable)
Verify by VIN/registration and FAG/OE part numbers for guaranteed fit

When to Replace

Clunks or rattles over bumps; knocking on rough roads
Loose, vague turn-in or excessive body roll
Torn dust boots, rust contamination or play in the joints
MOT/inspection advisory or fail for link wear

Installation Summary

Support the suspension; remove wheel for access
Counter-hold the ball stud (hex/Torx) to prevent boot damage; remove nuts
Fit new link; torque fixings to OE specification (with suspension loaded at ride height)
Inspect the anti-roll bar bushes and opposite link; replace in axle pairs for best results

Good Practice

Use new self-locking nuts where specified
Do not twist the dust boot during tightening
After replacement, road-test and recheck torque

Warranty: FAG suspension components are covered by the manufacturer’s warranty when supplied via authorised distributors. Correct fitment is required for warranty validity.

Manufacturer	Productnumber
audi	8A0 505 466 C , 8A0505466C
audi	8A0505466C
audi	8D0 505 466 , 8D0505466
audi	8D0505466
vw	8A0 505 466 C , 8A0505466C
vw	8A0505466C
vw	8D0 505 466 , 8D0505466
vw	8D0505466

Usage numbers
DELPHI TC993
FEBI BILSTEIN 39536
LEMFÖRDER 14596 01
LEMFÖRDER 1459601
METZGER 6-512
METZGER 6512
MEYLE 116 060 8296
MEYLE 116 060 8296/HD
MEYLE 1160608296
MEYLE 1160608296HD
MOOG AU-LS-8296
MOOG AULS8296
OPTIMAL G7-515
OPTIMAL G7515
QUINTON HAZELL QLS3179S
RUVILLE 915731
SCHAEFFLER GRUPPE 818 0212 10
SCHAEFFLER GRUPPE 818021210
SIDEM 37261
TRW JTS106

Manufacturer	Model	Version	Engine code	Construction type	Construction start	Construction end	Pk	Power kw
audi

FAQ

You can enter your Vehicle Registration Number on our homepage or manually select your vehicle details. We will then filter the parts that match your vehicle. Always double-check the Product Properties section to confirm correct fitment.

Yes! We’re constantly expanding our product range and catalog. If you can’t find the part you’re looking for, please contact us. We work with several manufacturers and may be able to source the part for you.

Many product pages include a Fitment Details tab with additional information. If you still have questions, feel free to use our message service — we’re happy to help.

Parts do not come with additional items like fitting kits or gaskets unless it is clearly specified in the Part Details section of the product page.

Brake Discs: Most standard brake discs are priced individually, but for safety reasons, they must be purchased in pairs. When required, we will automatically set the quantity to 2 in your basket.
Brake Pads: These are sold as a set (either front or rear), so one box is enough for two discs.

The Compatibility Table can be found on each product page, usually below the main product description. Look for a tab or heading labeled Compatibility.