Orders Above £25 free Delivery

Quality made brands

    Orders Above £25 free Delivery

    Quality made brands

    Great Deals on CarParts

    Easy 30 Day Returns

    search for part number
  • Login

  • Find correct parts for your car.

    Search by registration number

    GB

    VIN number / Chasis number

    OR

    Select Car Make Model

    1
    2
    3
    Schaeffler INA
    Outer diameter (mm) 70
    Width (mm) 28.5
    Svhc no svhc present!
    Product number: 533 0061 20

    Ina Belt Tensioner V-ribbed Belt For Fiat Iveco Daily Ducato

    Out of stock

    Price incl. vat.
    £ 33,87

    Description


    INA Belt Drive Components

    V‑Ribbed Belt Tensioner

    For the front‑end auxiliary drive (FEAD). Maintains constant belt tension for quiet, efficient power to the alternator, A/C compressor and other accessories.

    OE‑grade quality Low noise Long service life
    INA V‑ribbed belt tensioner main view
    INA V‑ribbed belt tensioner side view INA V‑ribbed belt tensioner 360 angle view INA V‑ribbed belt tensioner additional view

    When to Change

    • Noise: chirping/squeal at start‑up or with A/C load.
    • Visual wear: cracked or glazed belt, frayed ribs, rubber dust.
    • Arm movement: tensioner arm flutters or sits off‑center.
    • Bearing condition: pulley feels rough or has play when spun by hand (engine off).
    • Contamination: oil/coolant on belt or pulley surfaces.
    Service tip: Replace the tensioner whenever fitting a new FEAD/serpentine belt to avoid repeat labour and early failures.

    How to Fit (Universal Guide)

    1. Preparation. Park safely, engine cold. Photograph the belt routing. Tools: serpentine belt tool/long ratchet, socket set, torque wrench.
    2. Release tension & remove belt. Rotate the tensioner using its square hole or hex boss; slip the belt off a smooth pulley and release slowly. Remove the belt fully.
    3. Remove old tensioner. Unbolt the unit. Keep any spacers/dowels. Spin other pulleys to check for noise or play.
    4. Install new INA tensioner. Position, hand‑start bolts, then torque to the vehicle manufacturer’s spec. The pulley must spin freely and clear nearby parts.
    5. Refit belt. Route per your photo/diagram, leave the easiest pulley for last. Pre‑load the tensioner, seat the belt on all ribs, release slowly.
    6. Final checks. Turn the crankshaft by hand two full turns; re‑check tracking and alignment. Start engine; observe the tensioner arm and listen for noise.

    Always follow the vehicle manufacturer’s procedures, torque values and safety guidance.

    Manufacturer Productnumber
    fiat 299 4029 , 2994029
    fiat 2994029
    fiat 504000410
    fiat 504086751
    iveco 5040 86751 , 504086751
    iveco 504000410
    iveco 504086751
    Usage numbers
    BOSCH 1 987 945 832
    BOSCH 1987945832
    BREDA LORETT CR3503
    DAYCO APV1075
    DAYCO APV2697
    FEBI BILSTEIN 30178
    GATES 7808-21538
    GATES 780821538
    GATES T39138
    GMB GHAT-200
    GMB GHAT-247
    GMB GHAT200
    GMB GHAT247
    HK A848
    HUTCHINSON T0431
    IPD 10-0848
    IPD 100848
    OPTIMAL 0-N1483S
    OPTIMAL 0N1483S
    QUINTON HAZELL QTA1253
    RUVILLE 55880
    SCHAEFFLER GRUPPE 533 0061 20
    SCHAEFFLER GRUPPE 533006120
    SCHAEFFLER GRUPPE F-611806
    SCHAEFFLER GRUPPE F611806
    Schaeffler INA F-223691
    Schaeffler INA F223691
    SKF VKMCV52012
    SNR GA358.03
    SNR GA35803
    SWAG 37 93 0178
    SWAG 37930178
    TRIPLE FIVE 300 5710
    TRIPLE FIVE 3005710
    VAICO V24-0535
    VAICO V240535
    Manufacturer Model Version Engine code Construction type Construction start Construction end Pk Power kw
    fiat fiat

    FAQ


    You can enter your Vehicle Registration Number on our homepage or manually select your vehicle details. We will then filter the parts that match your vehicle. Always double-check the Product Properties section to confirm correct fitment.


    Yes! We’re constantly expanding our product range and catalog. If you can’t find the part you’re looking for, please contact us. We work with several manufacturers and may be able to source the part for you.


    Many product pages include a Fitment Details tab with additional information. If you still have questions, feel free to use our message service — we’re happy to help.


    Parts do not come with additional items like fitting kits or gaskets unless it is clearly specified in the Part Details section of the product page.


    Brake Discs: Most standard brake discs are priced individually, but for safety reasons, they must be purchased in pairs. When required, we will automatically set the quantity to 2 in your basket.
    Brake Pads: These are sold as a set (either front or rear), so one box is enough for two discs.


    The Compatibility Table can be found on each product page, usually below the main product description. Look for a tab or heading labeled Compatibility.