Find correct parts for your car.

Search by registration number

VIN number / Chasis number

OR

Select Car Make Model

Search by company, model and type.

Outer diameter (mm)	76
Width (mm)	24
Svhc	no svhc present!

Product number: 534 0083 30

Ina Belt Tensioner V-ribbed Belt For Volvo 850 S70 S80 V70

In stock

Shipping method	Delivery time	Stock
Shipping	18-8-2025	3

Price excl. vat.

£ 53,23

Add to cart

Description

INA Belt Drive Components

V‑Ribbed Belt Tensioner

For the front‑end auxiliary drive (FEAD). Maintains constant belt tension for quiet, efficient power to the alternator, A/C compressor and other accessories.

OE‑grade quality Low noise Long service life

INA V‑ribbed belt tensioner 360 angle view

INA V‑ribbed belt tensioner additional view

When to Change

Noise: chirping/squeal at start‑up or with A/C load.
Visual wear: cracked or glazed belt, frayed ribs, rubber dust.
Arm movement: tensioner arm flutters or sits off‑center.
Bearing condition: pulley feels rough or has play when spun by hand (engine off).
Contamination: oil/coolant on belt or pulley surfaces.

Service tip: Replace the tensioner whenever fitting a new FEAD/serpentine belt to avoid repeat labour and early failures.

How to Fit (Universal Guide)

Preparation. Park safely, engine cold. Photograph the belt routing. Tools: serpentine belt tool/long ratchet, socket set, torque wrench.
Release tension & remove belt. Rotate the tensioner using its square hole or hex boss; slip the belt off a smooth pulley and release slowly. Remove the belt fully.
Remove old tensioner. Unbolt the unit. Keep any spacers/dowels. Spin other pulleys to check for noise or play.
Install new INA tensioner. Position, hand‑start bolts, then torque to the vehicle manufacturer’s spec. The pulley must spin freely and clear nearby parts.
Refit belt. Route per your photo/diagram, leave the easiest pulley for last. Pre‑load the tensioner, seat the belt on all ribs, release slowly.
Final checks. Turn the crankshaft by hand two full turns; re‑check tracking and alignment. Start engine; observe the tensioner arm and listen for noise.

Always follow the vehicle manufacturer’s procedures, torque values and safety guidance.

Manufacturer	Productnumber
audi	074 145 299 , 074145299
audi	074145299
seat	074 145 299 , 074145299
seat	074145299
skoda	074 145 299 , 074145299
skoda	074145299
volvo	9179314
vw	074 145 299 , 074145299
vw	074145299

Usage numbers
BREDA LORETT TOA3604
DAYCO APV2294
FEBI BILSTEIN 24328
GATES 7808-21337
GATES 780821337
GATES T38437
HK A1033
HK A1033-U
HK A1033U
IPD 10-1033
IPD 101033
RUVILLE 56524
SCHAEFFLER GRUPPE 534 0083 30
SCHAEFFLER GRUPPE 534008330
SKF VKM 36530
SKF VKM36530
SNR GA365.34
SNR GA36534
TRIPLE FIVE 950423

Manufacturer	Model	Version	Engine code	Construction type	Construction start	Construction end	Pk	Power kw
volvo

FAQ

You can enter your Vehicle Registration Number on our homepage or manually select your vehicle details. We will then filter the parts that match your vehicle. Always double-check the Product Properties section to confirm correct fitment.

Yes! We’re constantly expanding our product range and catalog. If you can’t find the part you’re looking for, please contact us. We work with several manufacturers and may be able to source the part for you.

Many product pages include a Fitment Details tab with additional information. If you still have questions, feel free to use our message service — we’re happy to help.

Parts do not come with additional items like fitting kits or gaskets unless it is clearly specified in the Part Details section of the product page.

Brake Discs: Most standard brake discs are priced individually, but for safety reasons, they must be purchased in pairs. When required, we will automatically set the quantity to 2 in your basket.
Brake Pads: These are sold as a set (either front or rear), so one box is enough for two discs.

The Compatibility Table can be found on each product page, usually below the main product description. Look for a tab or heading labeled Compatibility.