Orders Above £25 free Delivery

Quality made brands

    Orders Above £25 free Delivery

    Quality made brands

    Great Deals on CarParts

    Easy 30 Day Returns

    search for part number
  • Login

  • Find correct parts for your car.

    Search by registration number

    GB

    VIN number / Chasis number

    OR

    Select Car Make Model

    1
    2
    3
    Schaeffler INA
    Outer diameter (mm) 76
    Width (mm) 26
    Svhc no svhc present!
    Product number: 534 0135 30

    Ina Belt Tensioner V-ribbed Belt For Volvo S40 V40

    Price excl. vat.
    £ 39,92

    Description


    INA Belt Drive Components

    V‑Ribbed Belt Tensioner

    For the front‑end auxiliary drive (FEAD). Maintains constant belt tension for quiet, efficient power to the alternator, A/C compressor and other accessories.

    OE‑grade quality Low noise Long service life
    INA V‑ribbed belt tensioner main view
    INA V‑ribbed belt tensioner side view INA V‑ribbed belt tensioner 360 angle view INA V‑ribbed belt tensioner additional view

    When to Change

    • Noise: chirping/squeal at start‑up or with A/C load.
    • Visual wear: cracked or glazed belt, frayed ribs, rubber dust.
    • Arm movement: tensioner arm flutters or sits off‑center.
    • Bearing condition: pulley feels rough or has play when spun by hand (engine off).
    • Contamination: oil/coolant on belt or pulley surfaces.
    Service tip: Replace the tensioner whenever fitting a new FEAD/serpentine belt to avoid repeat labour and early failures.

    How to Fit (Universal Guide)

    1. Preparation. Park safely, engine cold. Photograph the belt routing. Tools: serpentine belt tool/long ratchet, socket set, torque wrench.
    2. Release tension & remove belt. Rotate the tensioner using its square hole or hex boss; slip the belt off a smooth pulley and release slowly. Remove the belt fully.
    3. Remove old tensioner. Unbolt the unit. Keep any spacers/dowels. Spin other pulleys to check for noise or play.
    4. Install new INA tensioner. Position, hand‑start bolts, then torque to the vehicle manufacturer’s spec. The pulley must spin freely and clear nearby parts.
    5. Refit belt. Route per your photo/diagram, leave the easiest pulley for last. Pre‑load the tensioner, seat the belt on all ribs, release slowly.
    6. Final checks. Turn the crankshaft by hand two full turns; re‑check tracking and alignment. Start engine; observe the tensioner arm and listen for noise.

    Always follow the vehicle manufacturer’s procedures, torque values and safety guidance.

    Manufacturer Productnumber
    volvo 9146249
    Usage numbers
    AUTEX 601844
    BREDA LORETT TOA3519
    DAYCO APV2317
    FEBI BILSTEIN 26679
    GATES 7808-21187
    GATES 780821187
    GATES T38287
    GMB GAT21450
    HK A839
    HK A839-U
    HK A839U
    HUTCHINSON T0381
    IPD 10-0839
    IPD 100839
    LUCAS ELECTRICAL LA0431
    QUINTON HAZELL QTA1344
    RUVILLE 56527
    SCHAEFFLER GRUPPE 534 0135 30
    SCHAEFFLER GRUPPE 534013530
    SKF VKM 36124
    SKF VKM36124
    SNR GA365.45
    SNR GA36545
    SWAG 55 92 6679
    SWAG 55926679
    TRIPLE FIVE 443 5839
    TRIPLE FIVE 4435839
    TRIPLE FIVE 950552
    TRISCAN 8641 273001
    TRISCAN 8641273001
    WILMINK GROUP WG1253380
    WILMINK GROUP WG1430588
    WILMINK GROUP WG2004557
    Manufacturer Model Version Engine code Construction type Construction start Construction end Pk Power kw
    volvo volvo

    FAQ


    You can enter your Vehicle Registration Number on our homepage or manually select your vehicle details. We will then filter the parts that match your vehicle. Always double-check the Product Properties section to confirm correct fitment.


    Yes! We’re constantly expanding our product range and catalog. If you can’t find the part you’re looking for, please contact us. We work with several manufacturers and may be able to source the part for you.


    Many product pages include a Fitment Details tab with additional information. If you still have questions, feel free to use our message service — we’re happy to help.


    Parts do not come with additional items like fitting kits or gaskets unless it is clearly specified in the Part Details section of the product page.


    Brake Discs: Most standard brake discs are priced individually, but for safety reasons, they must be purchased in pairs. When required, we will automatically set the quantity to 2 in your basket.
    Brake Pads: These are sold as a set (either front or rear), so one box is enough for two discs.


    The Compatibility Table can be found on each product page, usually below the main product description. Look for a tab or heading labeled Compatibility.