Orders Above £25 free Delivery

Quality made brands

    Orders Above £25 free Delivery

    Quality made brands

    Great Deals on CarParts

    Easy 30 Day Returns

    search for part number
  • Login

  • Find correct parts for your car.

    Search by registration number

    GB

    VIN number / Chasis number

    OR

    Select Car Make Model

    1
    2
    3
    MEYLE
    Supplementary article/info 2
    • with seal ring
    • with protection hose
    Number of pins (-pin connector) 3
    Sensor type inductive sensor
    Cable length (mm) 506
    Product number: 100 899 0080

    Meyle Crankshaft Pulse Position Sensor For Audi Ford Seat Skoda Vw A3 Alhambra Bora Calif

    Delivery 2-3 Working Days
    Price excl. vat.
    £ 19,19

    Description


    MEYLE ORIGINAL · ENGINE SENSORS

    Crankshaft Pulse Position Sensor

    Precision Hall/inductive sensing of crankshaft speed and position for exact ignition and injection timing. OE‑spec connector, housing and harness length for a direct, reliable fit.

    OE‑spec accuracy Robust sealing Plug‑and‑play
    24
    2‑Year Warranty
    MEYLE ORIGINAL (authorised supply)
    MEYLE crankshaft pulse position sensor — main image
    MEYLE crank sensor — connector detail MEYLE crank sensor — mounting detail

    Key Features

    • Accurate signal: Stable waveform for precise ignition and fuel timing across temperature ranges.
    • Durable build: Oil‑, heat‑ and vibration‑resistant housing; secure strain‑relief on harness.
    • OE connectivity: Correct connector geometry and pinout; firm locking tab engagement.
    • Quality tested: End‑of‑line electrical and functional verification.

    When to Replace

    • Hard starting / no‑start when hot, random stalling, or extended cranking.
    • Erratic rev counter, misfires, poor acceleration, or limp‑home.
    • Stored faults such as P0335–P0339 (crankshaft position sensor circuit).
    • Physical damage to sensor body, cable, connector or visible corrosion.

    How to Fit (Universal Guide)

    1. Preparation: Park safely; engine cool. Disconnect battery. Locate sensor (usually near crank pulley, bell housing, or block).
    2. Remove old sensor: Unplug connector; release harness clip(s). Remove mounting bolt(s) and extract sensor carefully.
    3. Inspect seat & tone wheel: Clean mounting bore; check for debris or damage on the reluctor/tone ring.
    4. Install MEYLE sensor: Lightly oil O‑ring if fitted. Seat fully; torque bolt(s) to spec. Route harness like OE—away from heat/moving parts.
    5. Reconnect & test: Plug in connector until it clicks. Clear DTCs, start engine, and confirm stable idle and RPM signal.

    Always follow the vehicle manufacturer’s procedures and torque settings. Use diagnostic data (RPM, cam/crank sync) to verify repair.

    Warranty applies to MEYLE ORIGINAL parts purchased via authorised supply channels. Your statutory rights remain unaffected.

    Usage numbers
    MPS0010
    AIC 55307
    AIC 73359
    BOSCH 0 986 280 484
    BREMI 60219
    CALORSTAT by Vernet CS0352
    DELPHI SS11009
    FACET 9.0504
    FAE 79063
    FEBI BILSTEIN 37508
    HELLA 6PU 009 167-251
    HERTH+BUSS ELPARTS 70610072
    INTERMOTOR 18923
    JP GROUP 1193701800
    MAGNETI MARELLI 064848015010
    MEAT & DORIA 87232
    MEAT & DORIA 87374
    METZGER 0909006
    METZGER 0909077
    MTE-THOMSON 70411
    NGK 81161
    NRF 755006
    NTK 81161
    OPTIMAL 07-S038
    SIDAT 83.004
    SIDAT 83.006
    SWAG 30 93 7508
    TOPRAN 110 896
    TRISCAN 8855 10106
    TRUCKTEC AUTOMOTIVE 07.17.043
    VALEO 254045
    VEMO V10-72-1006
    WALKER PRODUCTS 235-1485
    Manufacturer Model Version Engine code Construction type Construction start Construction end Pk Power kw
    audi audi
    ford ford
    seat seat
    skoda skoda
    vw vw

    FAQ


    You can enter your Vehicle Registration Number on our homepage or manually select your vehicle details. We will then filter the parts that match your vehicle. Always double-check the Product Properties section to confirm correct fitment.


    Yes! We’re constantly expanding our product range and catalog. If you can’t find the part you’re looking for, please contact us. We work with several manufacturers and may be able to source the part for you.


    Many product pages include a Fitment Details tab with additional information. If you still have questions, feel free to use our message service — we’re happy to help.


    Parts do not come with additional items like fitting kits or gaskets unless it is clearly specified in the Part Details section of the product page.


    Brake Discs: Most standard brake discs are priced individually, but for safety reasons, they must be purchased in pairs. When required, we will automatically set the quantity to 2 in your basket.
    Brake Pads: These are sold as a set (either front or rear), so one box is enough for two discs.


    The Compatibility Table can be found on each product page, usually below the main product description. Look for a tab or heading labeled Compatibility.