Orders Above £25 free Delivery

Quality made brands

    Orders Above £25 free Delivery

    Quality made brands

    Great Deals on CarParts

    Easy 30 Day Returns

    search for part number
  • Login

  • Find correct parts for your car.

    Search by registration number

    GB

    VIN number / Chasis number

    OR

    Select Car Make Model

    1
    2
    3
    MEYLE
    Number of pins (-pin connector) 3
    Sensor type inductive sensor
    Cable length (mm) 695
    Product number: 314 899 8003

    Meyle Crankshaft Pulse Position Sensor For Bmw 3 5

    Delivery 2-3 Working Days
    Price excl. vat.
    £ 23,99

    Description


    MEYLE ORIGINAL · ENGINE SENSORS

    Crankshaft Pulse Position Sensor

    Precision Hall/inductive sensing of crankshaft speed and position for exact ignition and injection timing. OE‑spec connector, housing and harness length for a direct, reliable fit.

    OE‑spec accuracy Robust sealing Plug‑and‑play
    24
    2‑Year Warranty
    MEYLE ORIGINAL (authorised supply)
    MEYLE crankshaft pulse position sensor — main image
    MEYLE crank sensor — connector detail MEYLE crank sensor — mounting detail

    Key Features

    • Accurate signal: Stable waveform for precise ignition and fuel timing across temperature ranges.
    • Durable build: Oil‑, heat‑ and vibration‑resistant housing; secure strain‑relief on harness.
    • OE connectivity: Correct connector geometry and pinout; firm locking tab engagement.
    • Quality tested: End‑of‑line electrical and functional verification.

    When to Replace

    • Hard starting / no‑start when hot, random stalling, or extended cranking.
    • Erratic rev counter, misfires, poor acceleration, or limp‑home.
    • Stored faults such as P0335–P0339 (crankshaft position sensor circuit).
    • Physical damage to sensor body, cable, connector or visible corrosion.

    How to Fit (Universal Guide)

    1. Preparation: Park safely; engine cool. Disconnect battery. Locate sensor (usually near crank pulley, bell housing, or block).
    2. Remove old sensor: Unplug connector; release harness clip(s). Remove mounting bolt(s) and extract sensor carefully.
    3. Inspect seat & tone wheel: Clean mounting bore; check for debris or damage on the reluctor/tone ring.
    4. Install MEYLE sensor: Lightly oil O‑ring if fitted. Seat fully; torque bolt(s) to spec. Route harness like OE—away from heat/moving parts.
    5. Reconnect & test: Plug in connector until it clicks. Clear DTCs, start engine, and confirm stable idle and RPM signal.

    Always follow the vehicle manufacturer’s procedures and torque settings. Use diagnostic data (RPM, cam/crank sync) to verify repair.

    Warranty applies to MEYLE ORIGINAL parts purchased via authorised supply channels. Your statutory rights remain unaffected.

    Manufacturer Productnumber
    bmw 1 726 065 , 1726065
    bmw 1 726 066 , 1726066
    bmw 12 14 1 726 065 , 12141726065
    bmw 12 14 1 726 066 , 12141726066
    Usage numbers
    MPS0029
    BBT CSS906
    BREMI 60387
    CALORSTAT by Vernet CS0272
    DELPHI SS11021
    FACET 9.0130
    FAE 79038
    FEBI BILSTEIN 27321
    HELLA 6PU 009 110-541
    HERTH+BUSS ELPARTS 70610102
    INTERMOTOR 18821
    MAGNETI MARELLI 064848087010
    MEAT & DORIA 87110
    METZGER 0902037
    NGK 81320
    NTK 81320
    SIDAT 83.140
    SWAG 20 92 7321
    TOPRAN 501 295
    TRISCAN 8855 11109
    VALEO 254164
    VEMO V20-72-0432
    VEMO V20-72-0432-1
    WALKER PRODUCTS 235-1406
    Manufacturer Model Version Engine code Construction type Construction start Construction end Pk Power kw
    bmw bmw

    FAQ


    You can enter your Vehicle Registration Number on our homepage or manually select your vehicle details. We will then filter the parts that match your vehicle. Always double-check the Product Properties section to confirm correct fitment.


    Yes! We’re constantly expanding our product range and catalog. If you can’t find the part you’re looking for, please contact us. We work with several manufacturers and may be able to source the part for you.


    Many product pages include a Fitment Details tab with additional information. If you still have questions, feel free to use our message service — we’re happy to help.


    Parts do not come with additional items like fitting kits or gaskets unless it is clearly specified in the Part Details section of the product page.


    Brake Discs: Most standard brake discs are priced individually, but for safety reasons, they must be purchased in pairs. When required, we will automatically set the quantity to 2 in your basket.
    Brake Pads: These are sold as a set (either front or rear), so one box is enough for two discs.


    The Compatibility Table can be found on each product page, usually below the main product description. Look for a tab or heading labeled Compatibility.